Supported machine models

The software is able to automatically detect which type of supported machine is currently connected to the PC USB port. The Machine menu items are determined by the type of machine connected to the PC. If no machine is detected, all menu items will be grayed out. Your distributor will advise you about supported machine types. The following connection types are supported:
MachineEquivalentWi-FiMCSDCATAUSB
MC15000  
MC14000eXpressive920  
MC12000eXpressive900  
MC11000Elna9600  
MC10001    
MC10000 V3.x    
MC10000 V2.21    
MC9900eXpressive860    
MC9700Elna8600    
MC9500Elna8200    
MC500EeXpressive830  
MC450E     
MC400E     
MC350E

Elna8300

eXpressive820

   
MC300E     
MC200EElna8100    
SKYLINE S9atelier 9 
NS-1     
MB-4   
MB-4SeXpressive940   
MB-7eXpressive970   
Others      

Wi-Fi = Direct connection to machine via Wi-Fi local area wireless computer networking technology.
MCS = Machine Connection Software. When sending a design to machine, you send it via external machine connection software for further processing.
DC = Direct Connection: See Linking your PC by USB cable for details.
ATA = ATA PC card. Must be upgraded to Version 2.21. See http://www.janome.com/ or http://www.elna.com/.
USB = USB memory stick.

MC10000 V2.21, MC10000 V3.x or higher, and MC10001

On Windows® 7 or later, please send designs one at a time when using a USB-RS-232C Conversion Adapter. An error is displayed when trying to send multiple designs at the same time.

MB-4 machine

The MB-4 machine supports direct connection. You can download designs to the machine’s internal memory, or to an ATA Card or USB stick attached to the machine. Direct connection for the MB-4 machine is, however, only available in the Digitizer product level.