Hatch V1.0R Update 6
May 2018
This document contains notes on Hatch Update 6. This update is intended for installation with any released version (already installed) of Hatch 1.0 embroidery software. In case you missed any, previous updates are also included.
How to update your Hatch software...
The software automatically checks for updates each time it is run and the PC is online. If you go online while the software is running, you can use the 'Check for updates' command in the Help menu. Once the update is completed you will need to restart your PC for changes to take effect. Check your Help > About to make sure you have the latest update installed.
The date may differ in your particular installation, but the version number needs to be V1.0R.
Manual update
In the event that your automatic update does not work for any reason, please click this link. Some browsers may download the file directly to a 'download' folder without prompting you. Others may give you the option of saving to a preferred location:
Once the download is complete, locate your downloaded file and double-click to run the update.
Stitching
Use Context > Always Tie-Off & Trim to trim connectors. When turned on, connectors will always be tied off and trimmed. Otherwise, the software will decide when to trim. |
Customers have requested additional trim controls in order to turn off trims completely for individual objects - e.g. lettering - or for entire designs. You now have the option of turning off trims altogether. These can then be controlled by machine settings.
New connector and automatic trim controls are summarized as follows...
Connectors
- The new 'Always' method in the Connectors group applies to both Tie-ins and Tie-offs.
- When the 'Always Tie-off and Trim' icon is activated, the 'Always' option is simultaneously selected in the docker.
- When the 'Always Tie-off and Trim' icon is deselected, Connector settings in the docker revert to 'On'.
These settings work both for selected objects and when digitizing new objects.
Automatic trims
Setting | Purpose |
On, if next connector >= 2 mm | When selected, automatic trims will be applied when digitizing. This setting can be turned on or off for selected objects. The 'Always Tie-off and Trim' icon on the Context toolbar is enabled but not activated. |
Always | When selected, automatic trims will always be applied when digitizing or to selected objects. |
Off | This has the effect of turning off trims when digitizing. The setting can be turned off for selected objects. When selected, the 'Always Tie-off and Trim' icon on the Context toolbar is greyed out. |
For more detail, see Embroidery connections.
Font packs
This update includes three (3) new font packs for purchase. Each pack includes 3 new fonts. Font packs include:
Font Pack 6 – 3D Puffy Foam
- 3D Block 2
- 3D Brush Script
- 3D Monoglyceride
Font Pack 7 – Block
- Advent
- Kabel
- Swiss Hollow Run
Font Pack 8 – Fancy Fonts
- Locker
- Victorian
Western Serif
You can purchase the font packs directly from the Hatch Website.
Color changes
The following color-related issues have been fixed with the latest update...
Unexpected color changes during resequencing
A resequencing problem has been reported involving unexpected color changes within certain designs. This problem has been rectified.
Changing colors for selected objects
Problems have been reported when attempting to change colors of certain objects in certain designs. This problem has been rectified.
Embroidery files
The following file-related issues have been fixed with the latest update...
Default open option for machine files
With this update, the default open option for machine files has changed to 'Leave stitches as individual stitches'...
The 'Small Stitches' filter defaults to 'Always'...
By removing small stitches automatically, the software helps improve the quality of machine files upon opening.
Searchable machine file information
You can now search by additional machine file data in the Embroidery Library under the 'Manage Designs' toolbox. Design information that can now be searched on includes...
- Name
- Stitches
- Height
- Width
- Colors
The following file types are supported...
- PES
- JEF
- DST
- EXP
- HUS
- VIP
- VP3
- XXX
- SEW
- PCS
- SHV
Miscellaneous
The following miscellaneous issues have been fixed with the latest update...
Reinstall HASP Drivers shortcut
A 'Reinstall HASP Drivers' shortcut has been added to the Windows Start menu...
This shortcut will install or reinstall the latest HASP drivers packaged with the software. Use it whenever you encounter specific 'H0007' or 'H0050' errors. If there is still a problem, then the actual error message will be displayed. This needs to be reported to Support as it provides a better indication of the root cause of the problem.